Electricity is one of the main needs in the household. Even so, many don’t pay much attention to the flow of electricity in the dwelling. If the electricity is neglected and not monitored while using it, it can be fatal. Fire can be a risk if the use of electricity is not properly monitored. To anticipate this incident, you must understand the electrical short circuits. The following article will discuss the causes and ways to prevent electrical circuits.
Definition of Electric Short Circuit
Short circuit or commonly known as a short circuit is the term for an electric short circuit. This happens due to an electric current that deviates from the cable line that has been installed. This causes the flow of electric current through the network that is shorter than it should be.
Or technically, the cause of this short circuit occurs because the electric current is cut off. There is a collision between the positive electric current and the negative electric current which causes an electric circuit.
Causes of Electrical Short Circuit
The occurrence of a fire due to an electrical short circuit is certainly very dangerous because it can claim lives. To avoid electrical short circuits, you must know what are the causes of electrical short circuits which will be explained as follows:
Imperfect Cable Connection
Cables with imperfect connections have a high risk of electrical short circuits in buildings or residences. If the cable connections are not neat and the insulators on the cables are not tightly attached, the electric current in the cables can go off the rails and cause a short circuit.
The socket is loose
The next cause of an electrical short is a loose socket. Sockets that are unstable and no longer sturdy will result in decreased quality. The way it works is not good anymore. Loosening the socket can produce a spark resulting in an electrical short.
Low-Quality Electrical Devices
Electrical devices that do not comply with safety standards or are of low quality can increase the risk of an electric short circuit. Because the constituent components are too fragile and easily damaged. Therefore, you must make sure you are using an electrical device bearing the SNI logo.
Exposure to High Temperatures
If an electrical device is exposed to excessively high temperatures or is near a heat source such as a fire, it may cause an electric short circuit. Therefore, make sure that electrical devices are not near any heat-generating sources.
You must use a cable capacity that is suitable for its application. That is, if you need electricity with a high enough voltage, make sure the capacity of the cable that carries the electric current is appropriate and not under the voltage you are using. This effort is one way to prevent electrical short circuits.
A T-terminal socket is an electrical device commonly used for everyday purposes. However, it is not uncommon for a short circuit to occur at the socket due to careless use.
One of the causes of a short circuit is an overloaded socket. If there are too many wires plugged into the socket and pile up, they can generate heat. The high temperature comes from the electric current accumulated by the socket. Short circuits can also occur.
Wet Contact Outlet
Water is a substance that can conduct electricity. If an electrical device is exposed to spilled water, of course, it can cause an electric short circuit. Therefore, keep all appliances and power sources away from splashing water.